Jump to content
Posted

Wife and I were going to go on an overnight or two trip on the trike this week. Was supposed to be beautiful weather wed till fri....

Of course wed morning we wake up to thunderstorms with rain possible till fri....

 

Screw it, we took the Ford. Seeing I was in Iowa with a truck, I stopped at J&P Cycles and bought tires and tubes for my Heritage. 

These...

20230922_213151.jpg.576ff4be3efd7067334a7b58a37cc05c.jpg

 

Will be going on here this winter 

20230922_213216.jpg.f79ba04b30920f2224b04113773dd091.jpg

 

Something to do while the snow flies.

Going to replace wheel bearings also this go round....

Got the tool for the bearings on the recommendation of Doubletrouble....thanks bud

 

Forgot the pic...🤣🤣🤣

20230922_214416.jpg.23c35c12771f6a0000cb0e2fe59947b3.jpg

Edited by Max Tune

  • Replies 5
  • Views 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Figured I might as well rebuild the forks too....  

  • Doubletrouble
    Doubletrouble

    Seems decent to me. Worked just fine. My son used it on his bike as well. If something is gonna break it'll be when he is using it. Lol

Posted Images

Featured Replies

  • Author

Figured I might as well rebuild the forks too....

image.jpg.587b575eeaa1123f9eb44e1fb905fd24.jpgimage.jpg.022b27a2e8b9a1f23a06f6061e31dad8.jpg

 

  • 2 months later...
On 9/22/2023 at 10:35 PM, Max Tune said:

Wife and I were going to go on an overnight or two trip on the trike this week. Was supposed to be beautiful weather wed till fri....

Of course wed morning we wake up to thunderstorms with rain possible till fri....

 

Screw it, we took the Ford. Seeing I was in Iowa with a truck, I stopped at J&P Cycles and bought tires and tubes for my Heritage. 

These...

20230922_213151.jpg.576ff4be3efd7067334a7b58a37cc05c.jpg

 

Will be going on here this winter 

20230922_213216.jpg.f79ba04b30920f2224b04113773dd091.jpg

 

Something to do while the snow flies.

Going to replace wheel bearings also this go round....

Got the tool for the bearings on the recommendation of Doubletrouble....thanks bud

 

Forgot the pic...🤣🤣🤣

20230922_214416.jpg.23c35c12771f6a0000cb0e2fe59947b3.jpg

 

Where did you get the tool?

I’m real leary of tools from Amazon, but I’m not a fan of the prices of Jim’s either. Decent quality?