Just like the title says... the truck won't shift out of 1st at any throttle position unless I take my foot completely off the throttle, then get back on it. Once it's out of 1st and past ~28mph, it shifts 2-3 and 3-4 completely normally. It will try to kick down into 1 if I go WOT/WFO under about 45mph. And if I floor it at low speed, it'll hold 1st all the way to redline, and won't shift. 

 

Is this a governor issue? I replaced the solenoid and sensor back in 2010 with dealer parts. I'm ready to order the Suncoast governor kit, I just want to make sure it's (probably) not something else...

Double post

Edited March 25, 201411 yr by mopartechnician

Could be a kick down cable, band issue, or gov problem. I would get a gov pressure sensor and borg warner gov solenoid. Do a trans service with band adjustment and add a bottle of lucas trans fix. I dont know if the hd kit is needed but that isnt a bad price. You can get the sensor and solenoid for about 120

I would look at your tv cable then at your governer

You wouldn't have the FSM adjustment procedure handy, would you?

Nope, but you can download the FSM

Ill find it. I put the procedure on here once before

http://forum.mopar1973man.com/index.php?/topic/7638-throttle-cable-adjustment/

Thank you very much!