2002 2500. Does anybody know the torq specs for the front diff cover bolts? And do you guys recommend silicone or gasket? Thanks

I've used both with success. Well, I just did my rear with a gasket and "great stuff" on either side of the paper gasket. 35 ft-lbs in criss cross pattern. Just make sure the mating surfaces are clean clean. A lot of people don't bother with the torque specs but it's nice for peace of mind.

Thanks for the info

I typically just use silicone and hand tighten the bolts no measurements really.

What do you guys like for silicone? Brand? Temp?

What I use I know lots of people think I'm nuts...

http://www.homedepot.com/p/GE-Silicone-I-9-8-oz-Clear-Window-and-Door-Caulk-GE012A-24C/100091111

I guess I'm very old fashion, I use gasket material only and will always torque, plus a drop of the soft lock tight in the threads.

Never had an issue or a second thought when done. 

Reason I like the windows and door silicone is because at oil change time it cleans up really easy compared to other RTV or diff cover sealants. Never had a leak. I've seen a few sealants that have made a absolute mess of the bolt holes and now you got to run a tap in even hole clean the threads. Then have to run a wire brush over the bolts. Way too much work for diff oil change.