Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Steering Column Bearing

CTcummins24V
 Share

Recommended Posts

CTcummins24V

CTcummins24V

Posted
Posted

Is there another bearing in the actual steering column itself? I just replaced the intermediate shaft that hooks up to the gear box and now the whole assembly wiggles all the way up to the steering wheel...I already did the the bushing that's in the engine bay. I'm trying get the steering tight on this thing and the hole just keeps going deeper. My old intermediate shaft only had about 1/16 of play at the bottom u-joint so now the culprit points to the column itself. 

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...