Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Case 1835B skid loader drive chain

dave110

By dave110,
in General Conversations

 Share

Recommended Posts

dave110

dave110

Posted
  • Author
Posted

Ok, back together. I went with the advise on some internet forums and got a length of industrial chain w/ connector link instead of the CASE endless chain. Was about 40% of the cost and I was able to use 2 close hangers to pull it through. Only had to remove the one wheel spindle which needed bearings anyway, and the motor bearing cap. Messy oily job but not too bad now that I've done one.

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...