Jump to content
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

This is why I tinker with my truck.


Recommended Posts

  • Staff

 I'm asked frequently why I consistently "tinker" with my truck even though it's running good, no maintenance issues to address usually,  just want to flip the hood and stare in amazement sometimes. 

 But, this time I spotted something while I was installing a BHAF this morning.

20230226_093721.jpg.af50b88ec53d95661b41589a23560b0f.jpg

 

 

 An exhaust manifold bolt was backing out on the bottom rear cylinder.

 

20230226_093721_resized.jpg

 Had I not "tinkered" with the truck this morning I would not have spotted this and possibly lost the bolt all together.

 I tightened this one down and checked the others. The upper bolt on the same cylinder was about half a turn loose, the rest were good.

 Glad I caught that!

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...