Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Shredded my Headlamp to dash Wire-harness

CurtisRoberts88
 Share

Recommended Posts

CurtisRoberts88

CurtisRoberts88

Posted
Posted

Hey guys,

 

I was towing up hill today and somehow the wire harness that runs horizontally across the front frame cross member underneath the radiator fan came loose and got sucked into the fan. 13 wires got shredded. I replaced three blown fuses and managed to splice everything back together and got everything working (headlights, turn signals, hazards, windows, overhead display, etc.) EXCEPT my Power lock function. The unlock works on the driver side and passenger door but not unlock. 
 

i’ve been looking for about two hours now for a wiring diagram and can’t seem to find one for that harness. 
 

does anyone have any input on what I should try or am I missing something? 
 

I didn’t check relays. there are also two gray wires, two black wires and two Green wires with a purple stripe (I think) in the run that got shredded- I tried connecting the doubles together and then reversing the doubles. Unlock will still not work.
 

hope this makes sense. Thanks! 

 

 Share
Go to topic listing
×
×
  • Create New...