• Announcements

    • Mopar1973Man

      Quadzilla Tunes   06/12/2017

      QUADZILLA TUNE REPOSITORY - There is now a Quadzilla tune download area. When you submit a tune file to the download area it will automatically create a forum topic that allows discussion of your tune. So export your tune and upload it to the site. Then we all can help out in building better tunes. Check it out gang...
    • Mopar1973Man

      911 Support Group   06/22/2017

      Hey Gang, I've got the 911 support group database back up and running once again. It's listed in the 911 support category. It will allow members to list their contact information and location so other have a listed of members to call upon in the time of need. So if you wish to support other member please stop by and add your listing into the database. https://mopar1973man.com/cummins/911-support.html/contacts/

Archived

This topic is now archived and is closed to further replies.

Prowelder

Traction bars???

5 posts in this topic

Gang, I got to looking up latter and traction bars and came across these: http://www.tuffcountry.com/miscellaneous/traction-bars.html I was wondering is anyone is running a set and if they do anything?? I like the idea of them not hanging down below the frame and they are pretty cheap. I don't plan to race/pull on a daily basis, I just want to help with the hop when I play around every now and then. Also might help when pulling trailer? Any feedback would be great!! Thanks, Winslow

Share this post


Link to post
Share on other sites

That pic is for 3rd gens the second gens still mount under the frame. I have had a set of the early style ladder bars from them and they are about the best investment I have ever made. Tuff country in my opinion is the best bang for the buck as far as traction/ladder bars goes. I have been thinking about a set of those but don't think they would be as effective as the bottom mount ones so have held off on them for now.

Share this post


Link to post
Share on other sites

That pic is for 3rd gens the second gens still mount under the frame. I have had a set of the early style ladder bars from them and they are about the best investment I have ever made. Tuff country in my opinion is the best bang for the buck as far as traction/ladder bars goes. I have been thinking about a set of those but don't think they would be as effective as the bottom mount ones so have held off on them for now.

Oh I guess I was thinking these mounted on the top.... well heck.... but for the price I might try them.:shrug:

Share this post


Link to post
Share on other sites

They do mount on top on the 3rd gens like the pic shows but the second gen style is still an under frame/axle setup.

Share this post


Link to post
Share on other sites

They do mount on top on the 3rd gens like the pic shows but the second gen style is still an under frame/axle setup.

I gotcha. Well I was hoping they mounted on top, but I guess on the bottom wouldn't be too bad. You think these would be worth it for me?:shrug:

Share this post


Link to post
Share on other sites