Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Difference between Nozzles and Injectors

Heavyd1980
 Share

Recommended Posts

Heavyd1980

Heavyd1980

Posted
Posted

Alright so I have a question is there a physical difference between full body injectors and just nozzles? I have never seen either out of the engine other than pictures. Any pics would be great and how would a person go about finding out which brand and hp they are if they are already installed. any help is appreciated!

  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Really simple... The second part from the left is just the nozzle and pintle.

Posted Image

At any rate when you change nozzles and pintles you'll need to take the injectors in and have them pop tested. If the pop to early then tha pull the shim (the small washer to the right of the spring) and change it for thicker. Then retest again.

  • Like 1
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

If you take them apart they will have marking on the nozzle. As for the Injector body should have marking too that you should be able to Google and find some information... If not then consult one of the fine vendors here I'm sure some would know! :thumb1:

 Share
Go to topic listing
×
×
  • Create New...