Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Steering Column

jlwelding
 Share

Recommended Posts

  • Staff
JAG1

JAG1

Posted
  • Staff
Posted

You might try Googling ' Dodge Ram steering column bearings' I know there is a vendor that has a video out about a weak factory bearing inside the steering column. It's located on the engine side of the column tube. He said if you can reach down and pull on the steering shaft right where it comes out of the column tube, and has excessive play, you need this aftermarket bearing upgrade.Wish I had saved that link now. :duh:

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...