Jump to content
Mopar1973Man.Com LLC
  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Recommended Posts

Posted

All, Friend of mine called and said during a 4-3 downshift while decellerating, he heard a snapping sound and his RPM surged as he let off the clutch pedal. Now the clutch isn't engaging, and it appears that the linkage to the fork is intact. The pedal has no slack, and the truck will not transfer any power from the engine to the wheels in any gear. I am on a job and can't get eyes on the problem, but appeal for your experience. Any ideas?

Posted

Could of broke the input shaft or the clutch hub? :shrug: He's going to end up pull the trans just so he can see what's up with the truck.

I am leaning toward the center section of the clutch broke out... Since that might take the pressure plate load off the pedal. We will see what he says when he pulls the trans.
×
×
  • Create New...