Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Coolant Temp sensor with factory gauge

Rogan
 Share

Recommended Posts

Rogan

Rogan

Posted
  • Author
Posted

Ok, it's done. YAY ME! lolI got the CTS swapped this past weekend. Actually, Ryan, it was quite simple.. sorta.. LOLI disconnected the 3 pcm connectors, the AC drier sensor connector, pulled the harness off the cowling, and threw it over the driver's side fender..Then I removed the intake horn thingy..Then I pulled (2) 15mm bolts and removed the LR engine lift hook. BOOM! there was the CTS, in the wide open. The intake horn had to come off merely for ratchet swing clearance..

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...