Intercooler clamps

[pkorrupted03]

I have a 02 Cummins H.O. and I bought new 4 ply silicone intercooler boots that are rated 80psi working and 240psi burst. I ordered new t-bolt spring clamps but the idiot sent me regular t-bolt clamps without the spring. He is sending me replacements but they wont get here till Monday and this weekend is really the only time in the near future I will have to change these. I have a BD turbo elbow, BD boost fooler, BHAF mod, glasspacked 3" exhaust and hypertech. So not really putting too much over stock for psi. Should I just put the regular t-bolt clamps on or wait for the spring clamps? Thanks

[ISX]

If you need the truck then why not. I would replace them with the spring ones when they come in the mail though. They should hold to at least 45psi. I only had one blow off at 35psi because the bolt had stripped out from me impacting it on and off 20 times a day.