Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

np271/273 output seal

mopartechnician

By mopartechnician
in 3rd Generation Dodge

 Share

Recommended Posts

mopartechnician

mopartechnician

Posted
Posted

I figured I would post this for future reference since there is some doubt on this seal. If you ever have the rear output seal (rear driveshaft) go bad, the skf23000 works perfect. Napa is suppose to be able to have it but my local napa was worthless. I ended up buying one off amazon with overnight shipping for $20. Compared to the 50-60 mopar seal. You will need a 3-1/2" or 4" piece of pipe to install it. But it goes right in.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...