Dash light Fuse (at work)

[AGPTurbo]

Guys, backed out  of the drive today and realized that my dash lights were not on.  I just hooked up my a pillar gauges over the weekend and all of the lights were fine, now they and all other dash lights are off.  I have a backup camera in my truck and was messing with the wire taps in the fuse box in the cab, but I don't know if anything is related.  Since I cant go out to the truck I figured I'd ask if anyone knows where the fuse may be, so I can run out a t lunch.  BTW The radio , overhead display and I believe all other lights , pwr mirrors and mirrors were working on the way in.

Thanks

[Mopar1973Man]

More than likely you got a loose connection that is shorting out blowing the fuse. Check your dash fuse again.

[AGPTurbo]

Is there a specific fuse in the truck or under the hood?

Not to ask such simple questions, but I cant get to the truck

Thanks

[Mopar1973Man]

Fuse should be in the dash. Fuse #5 is for the cluster lighting.

[AGPTurbo]

****. Thanks Mike!

[AGPTurbo]

FIXED 

Thanks again

[notlimah]

So was it just a blown fuse that probably happened during install or was there a short some where causing the fuse to blow?

[AGPTurbo]

Fuse blew from me moving the ground while the lights were on, the spark of the ground disconnecting must have blown it. I wasn't sure the dash lights had their own fuse, and after driving to work in the dark was just nervous it was something bigger.