Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Cruise Control

trailhead
 Share

Recommended Posts

trailhead

trailhead

Posted
Posted

I have a 2001 Ram 2500, 4WD, 6 speed.  The cruise control indicator is always displayed on the dash, even before the truck is started.  None of the cruise control buttons do anything.  So, the cruise isn't working.  I took the truck to auto zone and they reported that the truck wasn't throwing any codes.  I attempted to contact dripley because he seemed to have this same problem, but his account no longer accepts messages.  My best guess is the clock spring.  Thanks in advance for any and all help.  

Link to comment
Share on other sites
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Dripley the last I knew was having personal issues and would come back when he was ready.

 

My best guess would be to ohm out the wiring for the cruise control.

Danger Icon DANGER!

 

WARNING! Be careful about suppling voltage to the air bag module you might trip it off.

 

So I suggest you unhook the batteries and wait 15 minutes and then unplug the air bag module. Then you can test against the cruise control buttons. Each one should have a different resistance.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...