2nd Generation Dodge 24 Valve Powertrain

I just ordered 3 glow shift 7 color series pillar guages: fuel pressure, boost, and pyrometer, along with the triple pillar pod. I was wondering about how long of a job that might be.

Also posted on CF for exposure.So my truck started acting up the other day... Driving at around 80kph I started to feel a light surging, it got progressively worse and then threw a CEL and I had significant dead pedal issues. I limped it home and checked codes. At that time it gave me p0122 and p0500. I cleared them and went for another drive. Same issues, but all it had was the p0122 code this time. I did an apps recalibration and the problem persists. Sometimes the code shows up in both the ecm and pcm sometimes just the ecm. The 0500 code has not returned. So I put on a used apps from a truck that was wrecked but running fine before... same issues, same code. I ran thr…

Just thought I would let yall know that I installed a FTE resonator RM4430A on my 2001 3500 with 4" straight thru with 5"elbow to 8" miter cut stack and it is well worth the money!!!! I honestly thought I liked the sound without it, but traveling over 100 miles a day towing our company trailer the dreaded drone got to me. I can finally talk, hear the radio(without turning it way up!), and hear myself think!...lol By the way I am no sales person for them, but had to give them credit where credit is due.:thumbup2: __________________ 2001 Dodge duallie 24 valve with 110 injectors, tst power max/stacked smarty, 3 piece header, HX35, Banks high rise intake,AirDog 165, ope…

I have searched the forum hoping some one else has had this problem but can't find one (4x4 01 3500). I replaced my u-joints that are connected to the front axles about a month ago because I found them loose when doing some maintenance on the truck. Put about 500 miles on it scene then and about a week ago I had a fast vibration on the truck. At first I thought I was on the shoulder of the road and was hitting a Rolled-in rumble strip, but I did not see any rumble strip in the road. It happens when i am going above 40mph and it will last for about 3-5 seconds and seems to get started when i hit a bump or a recess in the road. I live in Newport Oregon and commute on Hwy 10…

01 24 valve. Gauge wiring, not using factory cluster, is there a harness that leaves the computer to feed signal to the gauges? I'm wiring them into a Chevy and need the signal wires. Thanks Ron

Truck almost didn't want to start last night on way home from work. Got her started; good FP on way home (stock pumps), around 13-15 PSI. Got up this morning, started to crank, but no start. Turn key and won't even crank. Throwing a P0122 and so far nothing else. Just disconnected batteries couple minutes ago to reset APPS. Batteries are fairly new, 2 months old. Waiting the rest of the 30 min to try again, but looking for advice ahead of time. Will a dead VP44 always throw a code? I'm preparing myself for the worst with the VP, but hoping there's something I'm missing. If it doesn't crank again, I'll do the diagnostic on the APPS to check it out, once I get some more da…

I am not advertising but I had problems with my 47re in a 99 and did not have the money to rebuild after all the help from the guys here on this forum I found a man Robert from CASCADE TRANSMISSIONS from oregon I am in Texas and he walked me through it no problem and he sells parts and has plenty of videos on you tube if you need help contact him

Upon checking my drivers side ground wire I see it has 3 leads. 1 attaches to fender, heavy battery lead to bolt on engine block. Other lead has also been attached to this bolt but I believe it was originally attached somewhere else (maybe frame)? Will it make any difference where this 3rd lead is attached?

I was thinking of tying waste gate shut with a turnbuckle, I have the spring thingy but over time the boost is dropping off from 28 down to 24 now. There is no more adjustment in hook w/spring. What U think? Thanks

Well i got my BHAF in today and was putting it on and jsut decided to peak and see if the silencer ring was removed and found that alot more than the silencer ring was MIA. All I could see was a black film of oil. :banghead: I called around here and could get that one rebuilt through work for $800. Started looking around online and found some that were $1100 for an OEM replacement. Called one place and they had their "in house" brand which had the same warranty as the Holset but half the price and I dont have to send mine as a core. I know you pay for what you get sometimes but I had to get the cheaper one and hope it is as good as factory ones:pray:With the expeditied o…

Last year I had the ECM repaired because it would not come off of idle. This year it would start cold but would not start after it was warmed up? I sent the ECM back for repair but it was sent back saying it was fine but the PCM would be the problem? I sent in the PCM for repair and after it was returned and installed now the truck will not start at all? There are no codes showing? Any ideas?

Anyone else out there float gears? If so have you had any negative effects?

My truck has done it twice now. The other night I started it to go to town and it took three times cranking to start and they were long cranks like 15-20 seconds. notice that my WTS light was not on so I thought it was just the cold air cause it was 20 degrees outside. It started fine all other times that night. Started it to go to town again today and it did the same but WTS was on and it was 51 degrees today. I believe that the fuel system is losing prime. Was wondering if anyone else has experienced this. I will go out in a couple hours and see if it takes overnight or if it will do in a few hours. Truck has been sitting for almost three hours now.

My volt gauge goes up to the normal spot, just a hair over 14 but my scangauge II reads 13.5-13.6 volts. Is this normal?

First off im new to this site but ive found lots of useful info on here which has lead me to creating an acount. ok to begin i just rebuilt my vac pump, but im still getting a leak from that general area. i think its coming from the crankcase vent tube, i also noticed when i had the intercooler pipe off there was oil in there which makes me think my turbo is leaking? but would that make it come out of the vent tube? It only leaks out after driving a while. i checked for blow by today and didnt find any. i also saw that it smokes white out the vent tube. to add some more to it I re-oiled my K&N filter 3k miles ago and i think i might have used alittle much on it could …

I got a smoking deal on a used smarty for my 98. The guy was selling it for his buddy and wasnt sure if it was vin locked or not but didnt think it was. Last time he tried to download it the truck wouldnt take it so he put it back in the case and left it alone. His buddy says he can try to get a few bucks for it and I bit. He sient me pics and from them it did not look vin locked. I got it today and it would not finish downloaded, it would start at 0% and then time out communication or something. After this it my truck would not start so I was worried I just fried my ecm. I ended up unhooking my battery cables and then running the download, it worked but then it was just …

i swaped out my clutch in the shop most of the fluid leaked out. it looks like it all came out of the shifter mounting flang. why would some much come out of the top or should i look for another leak.

hey everyone im new to this wonderful forum,anyways ive got a 2002 dodge 2500 single cab diesel and everything on my truck is stock so where is a good starting point as what i should upgrade first. I want to add some power but nothing outrages just mosty for towing.

I have a 98.5 which don't want to start, just replaced the IP around 5000 miles, has no codes, FP 15 WOT 17 idle, Battery's are new. No AC from the alt. I have fuel to the injectors. when it will start runs strong, idles great. Have reset the APPS, any ideas? no mods except gauges.

Im corn fussed ?? replaced the injector pump and now i have an issue with excessive oil blowby ,its seems i need to be going better then 55 for this to happen ? any suggestions were i should b investigating first, thanks .