Jump to content
Looking for Staff Members

thoughts on stock ABS

Posted

So, now that I know the module is for the ABS on the truck...I'd really like to hear your thoughts on how well it works before I go through the exercise of finding a way to hook it back up or look for an alternate solution?  I remember it was not all that great on my '93 Pontiac compared to more modern versions.

  • Replies 9
  • Views 2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Featured Replies

My rwal system (what yours is) does not work worth a hoot. I can lock them up at about any point I feel like. It just slides.

  • Author
  On 2/8/2018 at 2:47 PM, jlbayes said:

My rwal system (what yours is) does not work worth a hoot. I can lock them up at about any point I feel like. It just slides.

 

so just go back to old school (and remove it all) and know how to drive then?  :ahhh:

 

Edited by PilotHouse2500

  On 2/8/2018 at 3:07 PM, PilotHouse2500 said:

 

so just go back to old school (and remove it all) and know how to drive then?  :ahhh:

 

I would chose that any day vs abs crap, I got it on my work trucks 2012 and 2016 f350 and plowing with abs and traction control that I can disable but it still trying to take over is very annoying. Never know what to expect where if it's all manual you get used to it and way you go.

  • Author

well I learned how to drive back in the 70's so I should be good.  Consider this subject CLOSED.  NO ABS in the new build. 

Edited by PilotHouse2500

They went to the moon without abs....

Supposedly more than once may I add, wonder what they put in tires for air, nitrogen Maybe

Edited by Dieselfuture

Don't mean to hi jack, but how do you just delete the ABS? Somehow 1 line from the MC would have to divide into 2. Can you get some kind of 'T' for that? And then just unplug it and put up with any codes?

  • Author

well if I don't have an ABS light I won't have any coeds on my dash!    It's been done many times on frame swaps I'm sure, I just have to make sure I do it right.  As old as this is for ABS I'm sure it's not going to be TOO hard to make it go away.

Post some pics when you're done if you don't mind. I'm sure it's been done before too. I'm just curious. I wouldn't mid if mine went away.

  • Author
  On 2/9/2018 at 2:10 PM, dave110 said:

Post some pics when you're done if you don't mind. I'm sure it's been done before too. I'm just curious. I wouldn't mid if mine went away.

 

follow my build thread and you can watch over the next few years as I get it all done...sorry won't be much faster than that...money is my driving factor.

 

Go to topic listing