ok fellows pulled hose of my turbo check it no in and out slack but up and down seems 1-4 inch found a garret 54 trim 0.60 turbo used for 300 bucks will it work on this 5.9 with 4 inch exhaust and 50hp injectors ez chip fass pump no nothing about turbos if not wheres ben place to buy one or info thanks.

You got more info on the turbo? As long as it’s not much bigger than HY/HX specs it sounds like itd be a good fit for your mods.

no i don't  but do you no any thing about cordone turbos thanks

A quick search of the info you gave on the Garrett turbo returned a majority of turbos suited for cars. So without an actual model number off the Garrett, I wouldn't use it.  I'm also wary of Cardone, purely because they supply parts stores with remanufactured turbos and charge 1k for them.

As for your current turbo, 1/4" is a lot of radial play, but if there is 0 axial play and the compressor wheel isn't hitting the housing, its OK to run. My suggestion would be to pick up a good used genuine holset turbo (can be found on Facebook for $300 or less), or if you're adventurous, try rebuilding it yourself. 

treed how is borg warner s366sxe and would it work on this 02 sorry don't no much about turbos thanks.

Do you have larger injectors? If not, is going to be laggy. A 62 mm is usually a good first turbo upgrade for those looking for more power. A 62 can be run with stock injectors, but it is also laggy. 

Edited March 12, 20187 yr by trreed

i have 50 hp injectors

 

Those will help with a 62 mm. But they're way too small for a 66 mm.  My recommendation still is to either find a good hx35, rebuild your current one, or consider a 62/65/12