Hey guess I'm finishing up my p 24v ! I was wondering what a good timing setting would be on s daily! 12mm pump, 63/68 over an 80, 6x16 injectors, adjustable gear,   181/214 cam! Thanks 

The best person I know that has that answer is @jlbayes or @TFaoro these two should be able to set you up with the timing for that p-pump 24V.

Start around 20* and move up as need be. 
It would help to speak with your injector to know how high your timing can be while being safe for DDing.

Personally I would not run less than 24*. If it was mine I would be at 26* or 28*.

@jlbayes

 

By chance do you have an up to date timing chart for the P7100 pumps? Something that shows the plunger lift measurements for those values...

no i don't ! 

13 hours ago, Mopar1973Man said:

@jlbayes

 

By chance do you have an up to date timing chart for the P7100 pumps? Something that shows the plunger lift measurements for those values...

 

No, anything past 14.5* is a calculated timing value anyways. 

 

We need to know the pump code to get pointed in a direction. Or cpl.