Hi everyone ive just been doing a few small odd jobs on the truck one issue i have is the seat switches they all work apart from the toggle switch to the right of the square switch.. what does this switch do and is there any common faults with this adjustment

 

thanks ??

Lumbar adjustment. Most likely the compressor or vent valve. Up should run a small compressor pumping up the bladder in the lumbar area. Then the down should vent that back off deflating. 

My lumbar works on the far right switch ? that works ok. 

On 8/7/2018 at 5:58 AM, Ronniemx3 said:

Hi everyone ive just been doing a few small odd jobs on the truck one issue i have is the seat switches they all work apart from the toggle switch to the right of the square switch.. what does this switch do and is there any common faults with this adjustment

 

thanks ??

Are you asking about the switch on the left?  That raises and lowers the front of the seat.  

The 3rd switch from the left isnt working the one i need to know the function of

 

Thanks man

Rear tilt. It will raise or lower the rear of the seat.

5 hours ago, Mopar1973Man said:

Rear tilt. It will raise or lower the rear of the seat.

 

Thank you @Mopar1973Man i will have too rip it apart and try find the issue

if you have motors that dont work...