So being underway with the Ppump swap.

 

i have Scheid Lines and a D&J grid heater delete spacer that is also a 1/2 inch taller and my monster ram hits on my lines and doesn’t go all the way on the spacer.

Its almost if I need a 1 inch spacer over stock and it will clear maybe, but I don’t want to be to tall so the hood doesn’t close ? 

 

Has anyone ran into this and what have you used to clear everything? (Lines,hood,ect)

 

This is on a 2001.5 24v

pic includes is what I’m talking about.

Edited October 21, 20186 yr by 24valvematt

Might consider a different intake. Remember Bank intake is design for the 24V and VP44 pump, not a p-pump. You'll have to consider a different intake that is designed for the 12V p-pump engines. The curve is different to fit over the lines. 

10 hours ago, 24valvematt said:

So being underway with the Ppump swap.

 

i have Scheid Lines and a D&J grid heater delete spacer that is also a 1/2 inch taller and my monster ram hits on my lines and doesn’t go all the way on the spacer.

Its almost if I need a 1 inch spacer over stock and it will clear maybe, but I don’t want to be to tall so the hood doesn’t close ? 

 

Has anyone ran into this and what have you used to clear everything? (Lines,hood,ect)

 

This is on a 2001.5 24v

pic includes is what I’m talking about.

Yeah might need to get a 12v one I agree.

 

I'm in the process of accumulating the parts to do the swap myself and I'd like to possibly get a new intake while I'm at it and I was wondering, could you possibly buy a twin ram intake like a lot of guys run on a 12v? Or are the lines not set in that configuration?

I saw one guy solve that problem by stacking 2 grid heater delete spacers and getting studs cut to length to bolt it all down.  

And it cleared this hood? That’s my concern really.

12 minutes ago, Sycostang67 said:

I saw one guy solve that problem by stacking 2 grid heater delete spacers and getting studs cut to length to bolt it all down.  

And it cleared his hood? And lines? No rubbing?

My bad, it wasn't 2 grid heater spacers, it was one and then another spacer about half the size.  No mention of anything rubbing.