- Replies 22
- Views 4.9k
- Created
- Last Reply
Top Posters In This Topic
-
Mopar1973Man 9 posts
-
Rotket 7 posts
-
Dieselfuture 4 posts
-
Alterego 1 post
Most Popular Posts
-
@Rotket for sure go after the miss.. you can also do a leak down test since you are going to have the injectors out. Pull each piston up on its stroke with all the valves closed on the cylinder. And a
-
Same here at 355k miles and the head gasket leak.
-
No. Because both valves are closed. So there is only pressure in the cylinder. No pressure in the intake manifold or the exhaust manifold. Pull the head. Then inspect the cylinder
I developed this miss over the winter and blowby pulsating out of the oil cap. There's also blowby floating by the firewall but that could be coming from the breather.
I don't think i have a vacumm leak because my defrost works. Can bad injectors cause blowby?
Here's a video, sorry for the wind noise.
Sorry I dont know why my sigs not showing up.
154000 mile 6 speed, with edge comp and 5 inch exhaust. Mostly stock truck.