Jump to content

Isspro gauge programming

Posted

Is there anyone on here that can program an Isspro fuel pressure gauge for me? I would like the warning light to come on at 10 psi. I dont really want to buy the stuff to do it because I only have the 1 Isspro gauge. If someone is willing to do it let me know a price and where to send it. Thanks

  • Replies 10
  • Views 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • dripley
    dripley

    He likes one dollar bills as packing material. I got 10 of them in a t'stat box a long time ago.

  • Mopar1973Man
    Mopar1973Man

    Sure, I've got the programming cable.  https://mopar1973man.com/contact/   Send to that address and I can program it. Just remember to send a note with contact information and return ad

  • Mopar1973Man
    Mopar1973Man

    No. I can adjust the brightness that's all.   The warning light can be programmed, the optional relay could be programmed to turn on or off a device. Then there is an advanced setting where

Posted Images

Featured Replies

  • Owner

Sure, I've got the programming cable. 

https://mopar1973man.com/contact/

 

Send to that address and I can program it. Just remember to send a note with contact information and return address. If you have other gauges I can program them as well like EGT's.

 

 

Edited by Mopar1973Man

    • Thanks 1
    • Author

    Thanks @Mopar1973Man I'll try to pull it out tomorrow and send it to you. How much $$$ you need for this?

    Its just the fuel gauge. All my other gauges are Autometer Cobalts so nothing to program on them.

    • Owner

    Enough for the shipping it back would be nice.

     

    Remember if I set the fuel pressure for 10 PSI it will trip the light at 9 PSI. So if you want the light at 10 PSI I've got to set for 11 PSI.

    • Author

    You know more about these gauges than I do. Im running a Fuel Boss with 16psi idle, 18psi max so I guess it could be set anywhere in the 11-14 range if the idiot light comes on 1psi lower than set point. Can the lighting color be changed to blue on the Isspro EV2 gauges? I remember reading something was programmable with lighting but dont remember what. 

    • Owner
    5 hours ago, Gregturley said:

    Can the lighting color be changed to blue on the Isspro EV2 gauges?

     

    No. I can adjust the brightness that's all.

     

    The warning light can be programmed, the optional relay could be programmed to turn on or off a device. Then there is an advanced setting where you can set the speed of the needle movement.

     

    post-1-0-80497600-1436996191_thumb.png

    • Thanks 1

    He likes one dollar bills as packing material. I got 10 of them in a t'stat box a long time ago.

    • Haha 2
    • Author

    @Mopar1973Man I have to hold off on sending you my gauge. Had some things come up with the truck and put the gauge back in for at least this weekend. Was nice talking to you for the short time yesterday. I can't thank you and everyone else on this site enough for the help, answers, opinions, etc that I've received in the short time I've been on here. Its rare to find people that don't dog out a guy for asking questions on the internet. Keep up the great work on Mopar1973man.com. 

    • Owner
    33 minutes ago, Gregturley said:

    @Mopar1973Man I have to hold off on sending you my gauge. Had some things come up with the truck and put the gauge back in for at least this weekend.

     

    Figure after the June 17th. I'll be done with all my hospital stuff.

    34 minutes ago, Gregturley said:

    I can't thank you and everyone else on this site enough for the help, answers, opinions, etc that I've received in the short time I've been on here. Its rare to find people that don't dog out a guy for asking questions on the internet. Keep up the great work on Mopar1973man.com.

     

    Thank you for the kind comments.

     

    Go to topic listing