If the Quadzilla Adrenaline V2 software takes complete control of the vp44, what would happen if I flashed the ecm with my superchips flashpaq programmer and put the quad above level 0? Would anything happen or would the quad still keep it's custom timing and/or fueling? I'm just curious as to what would happen and want to see the difference in timing. It would be neat to have the programmer on level 0 and the quad on anything above that.

The quad will over write the timing completely and alter the canbus fueling message per the tune you built.   there is no point in putting a superchip on it as the quad can make a better tune for your truck without any help.

 

 

1 hour ago, Me78569 said:

The quad will over write the timing completely and alter the canbus fueling message per the tune you built.   there is no point in putting a superchip on it as the quad can make a better tune for your truck without any help.

 

 

Thank you @Me78569 So if I do flash it just to compare them to see the differences, it won't do any harm to the VP if I go past level 0 right?

It won't harm anything its just pointless.

Stacking tuners just turns the throttle into a light switch. By the time you reach 30% of throttle by position the ECM will be at 100%. fuel rate.