I’m trying to figure out the OD cancel switch on my swap. Currently the truck runs great. Pulls my camper great on flat ground and small hills but steeper/longer hills I need the option to take it out of O/D to maintain a decent speed and keep EGT down. I’m sure it’s been done before but I’ve tried looking and can’t find any good instructions on how to wire the O/D cancel switch. Any help would be greatly appreciated 

Look in the 2001 Dodge Ram FSM, page 883. 

It won’t let me download the file. Is this because I’m not a paying member? 

5 hours ago, Mikeamyers30 said:

It won’t let me download the file. Is this because I’m not a paying member? 

Most likely. Does not cost much to be one. Look in subscriptions and you can see what it takes to have the privilege to do it. I am not sure what it takes. 

I found the correct wire (orange/white) and connected it to a momentary switch on the dash and then the other side of the switch to ground. It works great! Just wanted to share the progress 

Now you might want to talk to @IBMobile about the lock up switch design he has.