Hey fellas back again with a question for yas seems how this seems to be the only place to get any 24v info but The issue that I am having is this weekend at the dunes i was driving around and had bad terminals truck wouldnt start monkeyed with them long story short forgot to tighten nut that i had 12v power going to quadzilla. drove fine and then i shut it off... when i tried to start truck first thing the key was backwards all lights on dash lit when key was off and got a constant noise from fuel system relay when turned on nothing i unpluged tuner from fuse block in cab(engine fuse 9) and just plugged normal fuse in and all was normal just wouldnt roll over after plugging back in i finally got  it to start and it lopes at idle horribly give it a bit of peddal and it lopes worse and idle gets stuck at about 1100 and you give it a bit more peddal and its balls to the wall just trying to figure out if i maybe short circuited the tuner and fried it or if i fried the pcm, any info would be great before I started spending money on trial and error trying to figure this out

 thanks!!

If it worked with the Quad unplugged but don't work with it plugged in then I'd think it was something wrong with the Quad box.

Time to call @Quadzilla Power