Jump to content

Holset Hx35 Turbo Rebuild Adventure - Tips and tricks are welcome

Posted

I decided to take a crack at this just becuase my turbo failed and I love a good 3d puzzle.

 

 

Please share any info you have that can:

 

1) teach me something

2) make the adventure easier

 

Any and all fun turbo stories are welcome!!

  • Replies 7
  • Views 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • Dieselfuture
    Dieselfuture

    Well kit is $50 for holset, exhaust housing is the funnest part to get apart. Pb blast and some working on it does the trick. If it was brand new, it would be super easy to rebuild, not much to them.

  • leety
    leety

    Thank you sorry if this is a dumb question what is "Pb blast"?   Very clever prying technique.

  • Dieselfuture
    Dieselfuture

    https://www.google.com/search?client=ms-android-google&ei=PiGOX-mcMMbWtAbP9bHwDg&q=pb+blaster+penetrating+oil&oq=pb+blast+pen&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYADILCAAQyQMQFhAKEB4

Posted Images

Featured Replies

5967e46a92e98_2017-07-1316_15_52.jpg.6e1c2ce628679ce721d8d997672ec33e.jpgWell kit is $50 for holset, exhaust housing is the funnest part to get apart. Pb blast and some working on it does the trick. If it was brand new, it would be super easy to rebuild, not much to them. Need to be careful not to break tiny parts. Maybe take few pictures along the way as you disassemble it to help later. I used 2 1/4" flat pieces of steel and backed off bolts to pry it apart. Good luck. 

    • Thanks 1
    • Author
    1 minute ago, Dieselfuture said:

    5967e46a92e98_2017-07-1316_15_52.jpg.6e1c2ce628679ce721d8d997672ec33e.jpgWell kit is $50 for holset, exhaust housing is the funnest part to get apart. Pb blast and some working on it does the trick. If it was brand new, it would be super easy to rebuild, not much to them. Need to be careful not to break tiny parts. Maybe take few pictures along the way as you disassemble it to help later. I used 2 1/4" flat pieces of steel and backed off bolts to pry it apart. Good luck. 

    Thank you sorry if this is a dumb question what is "Pb blast"?

     

    Very clever prying technique.

    • Thanks 1

    https://www.google.com/search?client=ms-android-google&ei=PiGOX-mcMMbWtAbP9bHwDg&q=pb+blaster+penetrating+oil&oq=pb+blast+pen&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYADILCAAQyQMQFhAKEB4yBQghEKABOgQIABBHOgQIABAKOgQIABBDOgcIIRAKEKABOgcIABDJAxANOgQIABANUIokWJEvYJs0aABwAXgAgAGhAYgB5QOSAQMxLjOYAQCgAQHIAQjAAQE&sclient=mobile-gws-wiz-serp#scso=_RiGOX_azMNDNtQatvYnQAg79:0

    • Thanks 1
    • Author
    9 minutes ago, Dieselfuture said:

    https://www.google.com/search?client=ms-android-google&ei=PiGOX-mcMMbWtAbP9bHwDg&q=pb+blaster+penetrating+oil&oq=pb+blast+pen&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYADILCAAQyQMQFhAKEB4yBQghEKABOgQIABBHOgQIABAKOgQIABBDOgcIIRAKEKABOgcIABDJAxANOgQIABANUIokWJEvYJs0aABwAXgAgAGhAYgB5QOSAQMxLjOYAQCgAQHIAQjAAQE&sclient=mobile-gws-wiz-serp#scso=_RiGOX_azMNDNtQatvYnQAg79:0

    That looks like fun!

    46 minutes ago, leety said:

    That looks like fun!

    Enjoy :wink:

    I'm sure someone else will pitch in

    • Thanks 1

    You can get a balanced and ready to go center section for less than 400. If you rebuild check for wear in the bore where the seals set. End play causes the shaft to contact the seals which causes them to momentarily spin in the housing causing wear then a groove forms.

    • Thanks 1
    • Author
    3 minutes ago, Great work! said:

    You can get a balanced and ready to go center section for less than 400. If you rebuild check for wear in the bore where the seals set. End play causes the shaft to contact the seals which causes them to momentarily spin in the housing causing wear then a groove forms.

    Awesome thank you!  Very helpful.

    Go to topic listing