Jump to content
View in the app

A better way to browse. Learn more.

Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Posted

So I got the vp out, it wasnt that bad, and I didnt drop the key, so Im pretty happy right now, altho the thought of droppn all that cash for another one sux! Anyway when I was looking over stuff on the net and in the manual ect, it was suggested to change the sensor that is right behind the vp, and I cant remember where I saw that at or what it was called, its pretty much right behind the vp, can anyone tell me what its called?

  • Replies 6
  • Views 2k
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

I don't know about a 99 but my 02 has a camshaft positioning sensor behind ther that i wish i had replaced while i was in there. just did not know about it until i had replaced the IP. your 99 might not have one. could have a crank sensor in a differant location.

  • Author

yea there is a sensor there, its held on by 1 bolt i think n only got a couple of wires going to it, it must b the camshaft position sensor.

  • 9 months later...

yea there is a sensor there, its held on by 1 bolt i think n only got a couple of wires going to it, it must b the camshaft position sensor.

I am planning to replace mine, may I know where did you buy the part? Is online store like ebay can be trusted?

  • Author

I dont know if it makes a difference or not, but because it is electrical and hard to get too I bought my sensor at the dodge dealer. There is a parts place online called rockauto.com that i use alot now and they have name brand stuff, i didnt start buying from them till after i fixed my truck, but they probabbly have sensors.

I changed my cam sensor with the VP but decided to go with chainstore part because prior CRANK sensors (both original unknown brand and Cummins sensor) had failed close together. I figured that I may as well buy cheap if they are going to fail anyway. You can get to the cam sensor without pulling the VP. I forgot what fitting to remove the cam sensor - perhaps a torx??? Someone post back type & size when you find out.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.