Posted April 22, 201411 yr I am going to install a air dog 100 on my truck this week. Should i just order the fuel bowl delete or cap (plug) the supply lines on it somehow? What would i use for that? Does anyone have any tips on installing the draw straws?
April 22, 201411 yr Check this link out. Should have all kinds of good info in it. http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/25-fuel-system/30-how-to-install-a-airdog-150-fuel-system
April 22, 201411 yr I ran my ad165 through the stock housing. I have a 5 micron filter in the stock and a 2 micron filter and 20 micron w/s on the airdog. The stock housing is the best water seperator you can have. Whenever I install an aftermarket pump, I leave all the stock lines and pump in just in case Edited April 22, 201411 yr by mopartechnician
I am going to install a air dog 100 on my truck this week. Should i just order the fuel bowl delete or cap (plug) the supply lines on it somehow? What would i use for that? Does anyone have any tips on installing the draw straws?