I am going to install a air dog 100 on my truck this week.  Should i just order the fuel bowl delete or cap (plug) the supply lines on it somehow? What would i use for that? Does anyone have any tips on installing the draw straws?

 

 

Check this link out. Should have all kinds of good info in it.

 

http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/25-fuel-system/30-how-to-install-a-airdog-150-fuel-system

I ran my ad165 through the stock housing. I have a 5 micron filter in the stock and a 2 micron filter and 20 micron w/s on the airdog. The stock housing is the best water seperator you can have.

Whenever I install an aftermarket pump, I leave all the stock lines and pump in just in case

Edited April 22, 201411 yr by mopartechnician

I would leave the OEM housing in the system, keep a Baldwin PF7977 in there.

Thankyou for all of your help guys