Search the Community
Showing results for tags '1998'.
Found 6 results
-
1998 dodge power mirror problem
Waydin_Stewart posted a topic in 2nd Generation Dodge Non-Powertrain
I ordered towing mirrors off amazon last year. Got them in and installed them, I hook them up and tested both sides before putting everything back together. Both worked, Installed them, Passenger side still worked, but driver side didn't. Emailed company they sent out another set, error happened and I got 1 correct and 1 for a 2010+ sized mirror. Emailed them they sent out another set and they were correct. months go by and I didn't have the need to change the mirrors out as i already had them adjusted to where i needed them(folded down) I did some trading with a friend and traded him the mirrors that were messed up for a leveling kit and some cash. We took old ones off and up new ones on my truck. Tested before installing them everything worked great. Start the truck and turn it around in the driveway. My driver side works fine now but my passenger side on goes left and up folded in or flopped out. Im not a wiring guy and I need help figuring out why it has done this. -
I know I know, I have alot of posts on different subjects but I want to get everything lined out of this truck. I still haven't messed with the oil pan gasket and I need a front timing cover and tappet cover gasket aswell. I am curious of how to wire up a relay for the headlights on my 1998 dodge. Its not a sport model it originally had the 9004 lights in it but recently got some aftermarket cleared lens with projector. It has a dual beam setup but still uses the 9004 plug. Works great! I am gunna do the high low mod and have both on at once by using the wire splice under the steering wheel and want to take load of switch aswell so I want to add a relay to driver and passenger side. How do I go about doing this.
-
Is it possible to have an oil cap with a vent for the valve cover? I am fixing to install a 12v tappet cover and want to vent the valve cover aswell, so ill have 3 vents. Is it possible to vent the valve cover without drilling and welding bungs and doing what i said and making or buying an oil cap with baffles and filter on it?
-
I noticed on my 1998.5 dodge that the passenger side is 1” higher than the drivers side? I have not to my knowledge adjusted anything on the truck that would make 1 side sit 1” higher? I measured with a tape measure and it’s 11.25 on passenger side to top of tire and 10.5 on driver side to top of tire. Isn’t there bolts with oblong nuts on control arms? Orrr how would I fix this?
-
Hello again, I have had this starting problem for about 6 or 8 months now at least and I'm getting tired of it. I cant find any write ups online about it. Its a 1998 dodge cummins obviously. I don't really know how to describe it cause it is so random and all the lights work and try fires up fine once it finally cranks over. I'de guess about every 40th turn of the key is a dud and then the next 20 or 30 cranks after that are dude until the truck decides it wants to crank over and start. What could this be? I have checked every fuse in the truck that a test light can check. I have eyeballed all the square fuses under the hood. Everything seems okay. It has a new ignition in it, my father replaced it before i got the truck cause he thought that was the cause of the truck dieing(was vp44/ecm) so got new vp44 and rebuilt ecm. I believe it was the ignition anyways. I have the part and the box for the new one in it somewhere. Batteries are new and cable end are new with di electric grease slathered generously. It has a oreileys starter on it. It was put on truck when I replaced clutch as my original one was from autozone. But the shop I was at had an oreileys one in the box so we put it on.
-
I have a question for you guys.My sister in law has a 96? CTD, and the side of the truck and the motor says it has a 24 V Motor, I thought that the 24V's were from 98 up. It looks like a 12V motor as far as the IP goes ect. What's up. Could it be an "early 24V" motor? ..............
