Search the Community
Showing results for tags 'water hammer'.
-
Ok guys, bout to pull the trigger on an Airdog 100 as soon as my tax return comes in but had a few questions. First off, my Isspro ev2 fuel pressure gauge seems to be acting funny. When I get in and crank the truck in the mornings when engine is colder the gauge will go to zero for a minute and then pop up to about 10-12 at idle which is where it normally is. No rhyme or reason though I can be driving and it will drop to zero and sometimes stay there or pop back up. My set up on the gauge is I tapped into the test port of the vp44 with a banjo/snubber bolt to a grease gun hose then to my sending unit. I used teflon tape on everything but the banjo bolt to the vp44. I hope thats a good setup but if not I need to change it which might lead to my second question. When I install the Airdog do I montior the fuel pressure from the same spot like I am now or does a fuel line run to the banjo bolt I have now. If I was guessing I probably have to get a different fitting at the vp44 but not sure.
- 14 replies
-
- airdog
- isspro gauge
-
(and 1 more)
Tagged with:
-
Has anybody had issues adjusting the pressure on the airdog2/165, the instructions say 2 turns clockwise equals 15-16 psi, but my gauge says 26 psi. Trying to reduce pressure but if i go all the way counterclockwise on the airdog i only get 21 psi. Is the air dog wrong or the gauge?
- 10 replies
Rate The Author
Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"
Rate Us On Google
Please take the time and visit our Google Review page and give us a review of our services.
Tip Jar
If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar