Morimoto HID INSTALL

[banzaitoyota]

Mike, where did you mount all the wiring doo-dads?

[Mopar1973Man]

You'll enjoy those headlights I promise!

 

Ummm... Just zip tie to the fender. 

Edited April 22, 2019 by Mopar1973Man

[Dieselfuture]

I mounted some of it behind driver side battery tray and some on the driver side front clip. The one behind battery I used ss self tapers have to have the light out to do it. In case you have to aim lights I attached a picture of where screwdriver goes, not everyone catches that part.

[Mopar1973Man]

Make sure you change your turn signal bulbs before installing. It will piss you off to have to pull it again because you want to change blown blub or change to switchback LED bulbs like I did.

[banzaitoyota]

My ballast mount for the passenger side. I used countersunk hardware for the ballast, 3M double sided tape for the other black boxes

[Dieselfuture]

Looks clean 

[banzaitoyota]

Ok I must have missed something, I only have high beams

[banzaitoyota]

Found the problem, bent pin in the main headlight connection, thanks to Jeremy from retroshop.com for walking me through the troubleshooting

[banzaitoyota]

Some wiring cleanup and it's complete

[Mopar1973Man]

Now I want to hear about the light and beam pattern. I'm sure you'll like the D2S lens over the H1 Mini lens.

[banzaitoyota]

[Mopar1973Man]

Well?

[banzaitoyota]

 

 

 

38 minutes ago, Mopar1973Man said:

Well?

I like it. Still need to adjust the height if the beams. I also am waiting for the Lee flasher to arrive so I can take it in the road.

Edited May 2, 2019 by Mopar1973Man