Vp44 pump tap/metering solenoid issue?

[Trysten_torque]

2001 cummins 24v 5 speed I’ve swapped into a 97 single cab short bed Dodge Ram ss/t

i eliminated the harness at the 2 off-engine plugs and ran acc power through relay to give ecm power to run. 

I recently have purchased a edge comp box and tapped pump wire but engine makes no difference in power with pump tap wire plugged in or unplugged from box. Now here’s the real issue. I can’t remember the exact code off hand but it was a code for a pump solenoid and I believe it’s the pump metering solenoid the comp box taps into. What might be my issue here? I’m new to the forum as well. 

[Me78569]

how sure are you that you tapped the right wire?  

 

Where did you purchase the comp from?

[Mopar1973Man]

One of the few reasons I like the Stealth Plate over conventional tapping of the pump. 

 

Is the Edge Comp used? Is it the right series (early 2nd gen or late 2nd gen).