Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Fuel pressure offset / calibration?

CLorox

By CLorox
in Quadzilla Power

 Share

Recommended Posts

CLorox

CLorox

Posted
Posted

I have tried a few different 0-100PSI fuel pressure sensors and they all seem to read low (including the official fuel pressure sensor from Quad).  Is there a calibration or offset for the fuel pressure sensor values (or could we get one as an enhancement request?)

 

My edge was reading around 20PSI at idle after the fuel filter, a mechanical gauge is within a couple psi of that value, but I can't seem to find a 0-100psi sensor read from the Quad that reads higher than 10psi.  Maybe my luck is bad (3 different 0-100psi sensors all disagreeing with the mechanical gauge, and each other). 

  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

 Share
Go to topic listing


  • Current Donation Goals

    • Mopar1973Man Tip Jar
      Raised $20
×
×
  • Create New...