Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Edge Comp and Scangauge

Eforbes
 Share

Recommended Posts

Eforbes

Eforbes

Posted
Posted

Hey guys, just wondering what boost readings you all are getting when using scangauge 2, and edge comp, i get like 14psi boost showing on scangauge after changing map sensor with a genos garage unit, old one read .-0.7 at idl, and would track slightly behind actual shown on isspro gauge, new one tops out at 22psi on scangauge.Thanks

Link to comment
Share on other sites
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Mine starts out at about 28.6 and goes to 33.7 if I remember right... I never used the SGII for boost reading but its was good for seeing if the sensor actual changes... That's about it... Actually the SG displays PSIa (atomphere) so at idle it should be 14.3 PSIa (0 Boost) and then go up to about 22-25 PSI or 25+14.3=39.3 PSIa

--- Update to the previous post...

I've got video coming really soon! Processing as we speak! :thumbup2:

--- Update to the previous post...

Here you go...

http-~~-//youtu.be/7RhrgFWaIvY

  • Like 4
Link to comment
Share on other sites
  • 3 months later...
 Share
Go to topic listing
×
×
  • Create New...