Pilothouse/RAM3500 build

PilotHouse2500 · October 11

originally yes....now....I dont know...I'm waffeling on what to do and how to do it.

Royal Squire · October 11

I’m recommending using the corner lights and duplicating that look with the three center lights. Worry about stake pocket later

Doubletrouble · October 11

Can't wait to see more. Your project is coming along nicely. It's gonna be a sweet ride when done.

PilotHouse2500 · October 11

I did this to see how it looks. Use the corners to be the lights.

or this: mod the lower corner to be 45° and mount a single light to be side AND rear.

kbf98520 · October 12

I just scrolled this whole thread. Amazing work. Thank you for sharing your time!

Royal Squire · October 12

What I was trying to suggest is using the corners as in the 1st photo and drilling holes in rear for center 3 lights which would likely eliminate center rear stake pocket. I believe that most stake beds don’t have a center pocket anyway. Just my $.02

PilotHouse2500 · October 14

On 10/11/2024 at 11:10 PM, Royal Squire said:

What I was trying to suggest is using the corners as in the 1st photo and drilling holes in rear for center 3 lights which would likely eliminate center rear stake pocket. I believe that most stake beds don’t have a center pocket anyway. Just my $.02

Ya, I just spaced out "evenly" the pockets...there will never be a stake panel in there and it's more for looks than anything. Center rear three will be on the "bumper", and I mocked up what I'm now going to do on the corners for marker lights. TBD if I will do side marker/turn signals....