Brutus engine build timeline via Facebook

[CUMMINSDIESELPWR]

Here ya go folks.

 

https://www.facebook.com/photo.php?fbid=1636229086603819&id=100006502305486&set=a.1475918309301565.1073741830.100006502305486&refid=13

Edited October 19, 2014 by CUMMINSDIESELPWR

[MnTom]

Looks good, Randy!

[CTcummins24V]

Thanks Randy! Looks good!

[CUMMINSDIESELPWR]

if anyone has questions about the details of the build, tricks and tips ask away in this thread

[CUMMINSDIESELPWR]

350 miles so far and all is well. slowly building power  here and there. still on stock setting though.

[CUMMINSDIESELPWR]

this is what rotella 15/40 looks like after 550 miles...

[CUMMINSDIESELPWR]

so the chain used to hoist the engine and the old pistons...

redneck ornaments

[CUMMINSDIESELPWR]

here is a quick vid of cruising. runs, sounds real good and smooth

trim.9CBF7B6D-5CC9-4705-AE44-83A3EFBCD87A.MOV

[CUMMINSDIESELPWR]

Soooooo after almost 2000miles cross country in 4 days, not a single issue with the truck, the turbo however has developed a leaking rear seal and barely smokes and i mean can hardly see it during driving, but then the exhaust brake is on and used when i go, it POOFS out blue white oil smoke tgat built up during the exhaust brake being on. so i get to redo the turbo...

[LiveOak]

so the chain used to hoist the engine and the old pistons...

redneck ornaments

 

Hey! NICE set of truck nutz! 

[CUMMINSDIESELPWR]

2000 miles moved from colorado to florida, truck had zero issues coming down, need to redo the turbo as the place that rebuilt it didnt do well, when i use exhaust brake it weeps oil out the back turbo seal and burns it up when i get on the gas