Introductions

Hello all. My name is Ryan and I live just south of Dallas. I've worked for Ford for 5 years and coming up on my 5 year anniversary at International in Dallas. Look forward to helping with all I can.

Hello Everyone, Been visiting the site more and more trying to diagnose what's wrong with my 99 6 speed 4x4. Been having an issue with a cel (p1694) that I think is being caused by a bad ecm.From what I've seen it seems like the site had a lot of good info so hopefully I get it figured out, been quite the headache! Damn Ca smog!

Hey guys, just wanted to introduce myself. I am the proud owner of a 2005 Dodge Ram QCSB CTD. I've owned this truck since mid 2007 and have thoroughly enjoyed it throughout the years. Of course, we've had our ups and downs, but it's led me to having a truck I would have never dreamed of having 5 years ago. I will give a rundown of the trucks and my history, but for those who don't want to do a bunch of reading, here's a short list of how the truck is currently set up: Engine mods: Bored .020 over Shaved and coated pistons Brazilian 12v shot-peened/polished rods w/ARP fasteners Balanced rotating assembly 14mm main studs w/gorilla girdle DP1 Camshaf…

Hey yall, new to this site but not to diesel's. I currently have a 2001 dodge ram 2500 auto 130k and a 1997 dodge ram 2500 5 speed 210k. i love both of my trucks. when i figure out how to fill out the signature i will. Thanks

Hi, new to the site but not the Dodge/Cummins world in general. 1997 dodge 2500 w 12v but its wrecked (in rear ) so im swapping it into another vehicle.... directed here for the information and technical skills within! Im a master electrician with lots of vehicle wiring experience and getting ready to try a 47re install with factory dodge pcm - hoping to run up on some help because i think this particular thing is shyed away from in the swap community.... anyway , hello to all!

HI there I have an 06 Ram 2500 but its a gasser due to the budget, I work on school buses the past 14yrs, I know some about diesels but not a lot. Was directed here when looking for wiring diagram for my brother-in-laws 97 Ram 2500 diesel 5spd

Been watching this site for years, havn't been on many forums lately since I had to sell my 06 megacab. Just picked me up my third cummins (other one was a 02) its a 2001 sport, auto. I sure did miss the diesel. If you guys have any technical questions, I'm a former Dodge/cummins tech and spent many of years under the hood of 2nd/3rd gen trucks. I still do some side work, which keeps me busy.

Seems the "thing" to do, introduce yourself! So "hi!". I found this forum from the DodgeForum.com groups. Long story short I pretty much just finished restoring my greatgrandfathers 1951 Dodge B-3-D truck, and decided that I needed a new project. So, after kicking ideas around I decided the buy my buddy's 94 2500 diesel and figure out how to make it old and new at the same time. So I'm taking 2 51-53 cabs and sticking them together in an extended cab configuration with a stake side flat bed. I'm just starting on this project and I like to plan (less suprises later?) so started searching the net for places that might be of help, and this is one of the places I landed…

Hello my name is Chris. I grew up in Western Montana and have found myself in Boise Idaho for the last few years. I've been a lurker here and cumminsforum.com for a few years now. I can't even count how much time/money you guys have saved me with my miscelanous truck issues. I finally broke down and registered so I could start contributing instead of just taking. Thanks again guys, I look forward to many more years of information and help.Chris

Hi, Mike has given me an invite to come over so I thought I would say howdy. If I may be of any help with Smarty or BBi Injector questions please let me know! Thank you! Brian SmartyResource - - - Updated - - - Also, to show off another cool project that Mike has his hands in. www.SmartyResource.net/forum/

My name is Mike. Born and raised in Idaho. I spent almost nine years active duty in the U.S. Navy. As a Gas Turbine Tech. I have a 2006 CTD with the G-56. Smarty s-06/UDC. Southbend DD3600. And a few other bolt ons. Ive been lurking here for a while. Hope to learn some stuff from you all and help out when i can.

2nd owner of a 99 3/4 ton Dodge with a 385xxx mile 5.9 with a 5 speed and 4x4. Been a great truck. Currently building a new wiring harness as I haven't found one new or used to replace mine. (PDC caught fire under hood.) Anyways... Hope to maybe contribute some experience sometime!!

New guy here from northern Indiana. Have an 02 ecsb with some mods. Will fill out my sig when I get a chance. On a bunch of other popular cummins/ powerstroke sites. Always been a ford guy so there are a bunch of things i dont know about the common dodge problems but ive been working on em.

Old guy and old truck. I have a 1997 Ram 2500 4x4 diesel auto. I have owned it since 2001. just under 400 km. In need of help. Hello everyone...

GreetingsOwner of a 1999 2500 24V 2X4. Interested in fuel system mods to give Injection Pump longer life. Truck has just over 100,000 miles. Truck modded, Edge chip, Trans/Torque upgrades, Built to pull trailers.

Hello all, I have always wanted a diesel powered pickup and found my 1983 Ford F250 with a 24V Cummins which I recently purchased. Here is a build thread I've started and hope to hear some guidance before I make some mistakes. http://forum.mopar1973man.com/threads/7902-New-Member-New-Ride-83-F250-with-24V-Cummins Thanks to MoparMans articles which have helped me thus far! Here is the truck as of today.

Hi all, I'm Russ. I used to be on this site, and a few others. I'm from SE Idaho, lived by Firebird for a while. Now I'm in Encinitas, Ca. Quit my job and went back to school. As much as I love and miss Idaho it's pretty nice living a mile from the ocean.Anyway I've owned five brands of diesels, BMW, VW, Dodge, Chevy, and Ford. My current two being a '99 F250 and "our" 2011 Jetta TDI. I've still got my built Cummins engine sitting in Dads shop in Idaho, but haven't figured out whether to sell it or buy something to put it in.I better quit screwing off and get back to my math homework, so I'll end by saying I'm not the smartest guy around, but hopefully my experiences…

Hey Y'all, I'm Mick.I drive a '01 2500 QCLB, I love m,y truck a.k.a. "The Black Pearl". I do all my own work, dive in head first and hope for the best most of the time. But I manage to get-r-done! I build, customize and repair fire trucks for a living, also build rustic furniture on the side. I am an EVT certified technician. I love learning more about these awesome engines and am excited to be on board here. Feel free to ask anything lol.

Hello all,Just introducing myself after cruising this site for the last few years. I'm a student of Forest and Range Management at the University of Nevada, Reno. Originally from CA but it's more affordable to come here for school than stay there. I simply love working on, and learning about these awesome vehicles. Also just want to give a shout out to all the great members on this site, I have gleamed quite a bit of knowledge from y'all.

Hey all, I am from the north eastern ohio area. Right outside of Akron, pretty close to Wooster. Just traded one of my Powerstrokes for a 2001 Dodge 2500 with the 5.9 and 6speed. Really like it so far. The guy I got it from was not the most honest guy in the world but so far the truck seems pretty solid minus some minor problems. Looks like a pretty decent forum here, hope to learn more about these trucks!