Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

New Turbo

Posted

So I took the plunge and bought a new turbo after much debate... Got a 62/68/14 BW S300 SX-E gated. Beautiful work and amazing customer service from the guys at DAP!

20170607_200937.jpg

I have a question regarding fitment of the stock oil drain to an S300. Can I bend and flatten the metal tube to clear the wastegate actuator/compressor housing? I know they make flexible returns but I'm honestly nervous of screwing with the 16 year old bung on the block, as all the aftermarket kits drain to the block, not the factory rubber section our hard lines go to.

 

Also, some how I got a HX40 DP for what I'm assuming is an HE351 flange 

20170607_211948.jpg

20170607_213222.jpg

20170607_213250.jpg

Edited by Arodrigues29

  • Replies 10
  • Views 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • CTcummins24V
    CTcummins24V

    http://cppdiesel.com/7-8-high-temp-silicone-oil-drain-hose/   I think it's 7/8"

Posted Images

Featured Replies

I had to heat the drain tube with torch and used pliers to flatten it out near the flange. Then it didn't line up perfectly with the rubber, so I had to cut it back and get a longer piece of hose to make the connection.

  • Author
4 minutes ago, CTcummins24V said:

I had to heat the drain tube with torch and used pliers to flatten it out near the flange. Then it didn't line up perfectly with the rubber, so I had to cut it back and get a longer piece of hose to make the connection.

Did you use high heat hose or anything special? I know that line isn't under pressure but I figured that was partly steel line because of the potential for that drainage to be real hot.

  • Author
10 hours ago, jlbayes said:

Yea that looks like an he351 flange as well.

Yea, they overnighted me an HX40 flange, need to put it together tomorrow and get this thing in the truck. It's killing me to have the truck unoperational. It gave me some time to address the less important things I've been putting off for awhile like a clearance light, fog light aiming, etc lol.

  • 5 months later...

Jealous. Let us know how is does.

Edited by gipperkid

What size injectors are you running with this?

  • 1 month later...
Go to topic listing

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.