Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
Some of you know I produce my own power here at my place... Well I'm going to show you how to get the most from you water source... My irrigation system is 1" line at 120 PSI roughly... It's feed from a dam about 1/4 mile back on the mountain. (I'll get pics of this soon).
But I added a debris filter to prevent plugging of sprinklers and the pelton wheel jet...
http://forum.mopar1973man.com/attachment.php?attachmentid=1020
Normally get about 71-72 PSI after the pelton wheel is running this brings down the water pressure and keeps my garden hose from looking like water wennies...
http://forum.mopar1973man.com/attachment.php?attachmentid=1019
But this pressure feeds a permanent magnetic train generator and pelton wheel... Yeah I got a few repairs to do to the wheel leaking water is one thing but I also got a bearing get sloppy...
http://forum.mopar1973man.com/attachment.php?attachmentid=1017
Ok... I know its noise I know I got to replace bearing but what I'm doing in the video is turning off both windings and allowing the pelton wheel to free wheel if you listen you can hear it clearly rev up...
http-~~-//www.youtube.com/watch?v=K-9AmvyVr_g
But then the waste water leave the generator building...
http://forum.mopar1973man.com/attachment.php?attachmentid=1013
http://forum.mopar1973man.com/attachment.php?attachmentid=1016
And heads to my new pond I'm building...
http://forum.mopar1973man.com/attachment.php?attachmentid=1014
The pond is about 5-6 feet deep the tarp is about 29 x 39 foot. It's folded in the middle to aid in slack... But now I've got a perfect water source now for a cool dip in the summer or water for fire protection.
Here is my dam wall which happens to be just wide enough for a ATV or the lawn mower... The pipe is the spill way...
http://forum.mopar1973man.com/attachment.php?attachmentid=1015
http://forum.mopar1973man.com/attachment.php?attachmentid=1021
---------- Post added at 01:27 PM ---------- Previous post was at 11:22 AM ----------
Ok continuing on... I was in a mood for a ride so I grabbed the camera and headed for the mountain on the ATV. Point of reference from in my yard looking up...
http://forum.mopar1973man.com/attachment.php?attachmentid=1025
Down from on top of the ridge looking down...
http://forum.mopar1973man.com/attachment.php?attachmentid=1024
Looking back at the generator shed...
http://forum.mopar1973man.com/attachment.php?attachmentid=1023
Me... At the dam...
http://forum.mopar1973man.com/attachment.php?attachmentid=1022
Then a bit of video...
http-~~-//www.youtube.com/watch?v=pU0TNjuCNNw