For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
Mopar1973Man 1 post
Me78569 1 post
jlbayes 1 post
Hello everyone.. I'm lost and hope someone has experienced this before!!
Bought a rollover truck and came with half ton body. Swapped body and pcm. Original chassis and engine wiring.. Knew vp44 was shitty before swap.. Tried to start it anyway.. No dice.. So a known good vp was installed. Truck still wouldnt start.. Shows batt voltage at the plug with it plugged in and cranking or not... Cut wires off plug, hot wired truck 6/7 pins while plug still connected.. No start.. Unplug the connector and hotwire truck fires right up.. Seems like something is keeping the truck off in the computer.. Shut off wire blue with red already cut off too... Help!!!!