Jump to content

Connector tube question

Posted

In the middle of installing new injecotors currently. I'm curious what this buildup is on my connector tubes? How do you get it off?

q.jpg

  • Replies 3
  • Views 1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Posted Images

Featured Replies

It's on outside of oring, so must be just dirt. Wire brush should do it. Maybe tape off where oring is with some tape so you don't damage it. 

  • Owner

Normally, I take a can of brake clean and washout the connector tube holes in the head to ensure there is no debris in the head to mess up the o-ring sealing. Then clean up my connector tubes with a wire brush to remove the crud that might have formed. Just remove the o-ring its easy...

Edited by Mopar1973Man

  • Author
50 minutes ago, Mopar1973Man said:

Normally, I take a can of brake clean and washout the connector tube holes in the head to ensure there is no debris in the head to mess up the o-ring sealing. Then clean up my connector tubes with a wire brush to remove the crud that might have formed. Just remove the o-ring its easy...

I used some carb cleaner because hat all I had and scraped off the rest with a sharp blade. I didn’t notice as much power gain as I thought I would is this because of no added timing like a box would do?

Go to topic listing