How do I turn on the high idle on my quadzilla adrenaline v2 with control pod

@Quadzilla Power.  Does the base flash have high idle enabled on lvl 0?

 

 

@Thebeastxj00. Please consider ditching the pod and getting the iquad.  The power of v2 is pointless If you can't tune with it.

 

Edited March 4, 20196 yr by Me78569

13 hours ago, Thebeastxj00 said:

How do I turn on the high idle on my quadzilla adrenaline v2 with control pod

 

Set the warmup mode temperature. Like I've got 170*F for this setting. Then you need to set the high idle delay time which I've got 15-second delay. 

 

Warning don't run the Quadzilla high idle with the factory high idle on the ECM  enabled. If for chance the 3 CYL mode is kicked in while the Quadzilla running 6 CYL it will create a heck of a problem. 

1 hour ago, Mopar1973Man said:

 

Set the warmup mode temperature. Like I've got 170*F for this setting. Then you need to set the high idle delay time which I've got 15-second delay. 

 

Warning don't run the Quadzilla high idle with the factory high idle on the ECM  enabled. If for chance the 3 CYL mode is kicked in while the Quadzilla running 6 CYL it will create a heck of a problem. 

he only had the control pod, he does not have the iquad so he can't custom tune or setup custom values for things like high idle.

Ahh... Opps... Ok he need to upgrade..

 

The default V2.7.7HF that we send out does not have the high idle enabled by default. It can be turned on with the iQuad app, but not with the control pod.