So I got offered a billet intake from crazy carls tunnel ram pic down below for 100 and a intake horn aftermarket for 100 as has anyone ran one of those tunnel Rams any feedback and what is the bolt size for the intake plate m10 m8 1.5 1.75?

Right now 

And now I bought rims ugh it never ends 

Here u guys go

You think getting rid of the heat grid helps any?

No that's silly but something like this probably would 

I doubt a 4th gen intake plate will fit. I'll have to get a picture of the setup since I have got a 2012 Ram in the shop doing injectors on already.

Mike I'm a machinist I can make the horn fit if the bed plate fits but but I would have to get custom bent lines or some other odd thing 

And at that point making a bed plate on a cnc would be childs play 

That's what I'm talking about the plate not the horn. The horn will fit no matter what. It the base plate and the integrated grid heater. Grid heater is below the plate not above like on our trucks. 

Edited April 30, 20196 yr by Mopar1973Man

They make kits to put it on the inbound side of the horn