Hi,
I'm in the process of changing my light bulbs to LED's.
Following Mike's lead, I installed the EP27L Relay from NAPA to eliminate the notorious Hyper Flash on Turn Signals. 
The Hyper Flash is gone, but I noted the Relay clicks 2 or 3 times AFTER the signal is cancelled.  Happens regardless if its Left or Right. 
Is this what others are experiencing?   Not a show stopper, just curious.

Thanks.

Leaky

Normal function here. 

I saw a review (for what those are worth) of this Flasher.  Reviewer claimed he had same issue using it in his Excursion.  When I cancel it, the lights go out but you can hear the relay doing 2 residual clicks. PFM I guess.

Capacitance? I'll have to listen to mine but typically rocking out to music or just not paying attention to it.

i will have to look at mine, i did LED about 4 yrs ago...not a single issue since. i used an LED flasher recommended by cumminsdog from CF.

 

 

I don't notice any extra clicks.

What brand/type of bulb are you using?

45 minutes ago, Leaky88 said:

hat brand/type of bulb are you using

https://www.superbrightleds.com/moreinfo/tail-brake-turn/3156-3157-ck-led-bulb-dual-function-27-smd-led-tower-wedge-retrofit/3557/12873/

 

https://www.superbrightleds.com/moreinfo/tail-brake-turn/3157-switchback-led-bulb-dual-function-60-smd-led-tower-a-type-wedge-retrofit-car/1916/4478/

 

 

I'm using those exact two bulbs. No issues. Same for the flasher too.