Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
Just purchased a used ECM + PCM for my pickup. We travel a lot (including Mexico) and I want to keep a few critical spare parts on hand just in case. The donor rig was a perfect match (2002 Dodge Cummins HO six speed) for my truck and the price was right so I jumped on it. I'm assuming the ECM especially does not need to be re-flashed or anything and will be a plug and play item. Both computers are OEM off a totaled rig (121K miles....front end smashed but engine compartment looked fine). Guess I'm taking a little bit of a chance on this purchase but both computers looked great and the truck was running (obviously) at the time so they worked right up to the accident.
Anything special I need to know about replacing the computers? I'm planning on pulling both of mine (they work fine) and keep them as my spares. I'll run these replacements until one fails.
TNX....Mike