Jump to content
Posted

Can any one give me the demisions for the trans mount plate on a nv4500 in a 2000 dodge 2500 4x4 mainly the thickness so I can build one but keep every thing at the proper height 

  • Replies 5
  • Views 1.5k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Featured Replies

I can't help unless you go by distance between back of valve cover and cowl. I think if you get that distance correct then engine angle and everything else should be ok. 4 and 1/2" from cover to metal behind rubber weather strip close to 4th valve cover bolt center of valve cover. Put a jack under tranny lift it to that distance, measure what you need for steel mount you're making allowing for some sag of mount.

20200526_201842.jpg.292f28b02d26ec9b8e82894951a5ba34.jpg

  • Author

Its the plate that bolts to the trans tail housing then the mount bolts to that. I mainly need to know what the thickness of space it has