So I scored a vgt turbo off a 6.7 that hopefully will perform better than my current turbo(it's too big for the truck, and requires waaaaaaaaaaay too much fuel and timing to light off before 2500 rpm) but I need an adapter to bolt it to my current setup. What adapter will I need? I've been trying to find one but no dice. 

And yes, I have a computer to run the vgt. If anyone is interested I can possibly point you to the gentleman who made the computer kit(you have to solder it but it's not hard) and how to set it up. 

I'm guessing your talking about the manifold flange. They are rated like 2nd Gen is a T3 flange. Might be a T4 flange. I would call DAP and ask them for the flange size. They might have the adapter for such.

I think you need a exhaust manifokd that that turbo was bolted to. Or possibly a machine shop could mill a adapter plate 

 

I think the vgt is the 351.

Did some quick reading and nothing at a glance would make me want to swap out my 62 turbo for a 351vgt and exhaust manifold.  But that was just a quick glance

12 hours ago, Evan said:

I think you need a exhaust manifokd that that turbo was bolted to. Or possibly a machine shop could mill a adapter plate 

 

I think the vgt is the 351.

Did some quick reading and nothing at a glance would make me want to swap out my 62 turbo for a 351vgt and exhaust manifold.  But that was just a quick glance

It's an he300vg